Romco e-Catalogue 2019

Grab Bars Grab Bars Stainless Steel Stock Series Grab Bars Ready to Ship Code 1001 12": Code 1001 18": Code 1001 24": Code 1001 30": Code 1001 36": Code 1001 42": Code 1001 48": Code 1003 30"x30": All stock series grab bars are now available in white epoxy finish. Specifications: Stainless Steel SP suffix denotes a 32mm (1.25") diameter grab bar. NP suffix denotes a 38mm (1.5") diameter grab bar. Both styles feature: 1.5" wall clearance Type 304 stainless steel tube is with 0.049" thick wall Polished to a satin finish Flanges stamped in 12 gauge stainless steel and heliarc welded to bar for maximum strength All stainless steel grab bars utilize concealed fastener mounting The illustration to the right details the snap flange concealed mounting design Specifications: The Frost stock series grab bars are of an all stainless steel construction. The brushed and peened finish make this an attractive cost effective product to specify for any installation. Stamped flange is 12 gauge stainless with a full 360 degree bead weld to the 18 gauge stainless tubing. Features concealed mounting detailing as shown in illustration above. Barrier Free Access: The Frost stock series bars comply with handicap codes requiring 1-1/4" to 1-1/2" bar diameter and wall clearance of 1-1/2". Barrier free access specifications may vary depending on jurisdiction. 30" 12",18", 24", 30", 36" & 48" Detail showing peened grab area 35 30" Snap flange mounting Snap flange dimensions 3 dimples snap over undercuts on flange concealing mounting screws. undercut, (1 of 3) 1.5” (38 mm) 3” (76 mm) .5” (15 mm) Available in 1-1/4" (SP) or 1-1/2" (NP) dia. Available in 1-1/4" (SP) or 1-1/2" (NP) dia. Available in 1-1/4" (SP) or 1-1/2" (NP) dia. Available in 1-1/4" (SP) or 1-1/2" (NP) dia. Available in 1-1/4" (SP) or 1-1/2" (NP) dia. Available in 1-1/4" (SP) dia. Available in 1-1/4" (SP) or 1-1/2" (NP) dia. Available in 1-1/4" (SP) or 1-1/2" (NP) dia.