Romco e-Catalogue 2019

Dryers Warm Air Hand/Hair Dryers Code 1187: Code 1187-1: Code 1190: Code 1190-1: Code 1192: Code 1193: Code 1194: Code 1195: Code 1196: Code 1198: Auto "no touch", white finish, 120 v. Auto "no touch", white finish, 220 v. Auto "no touch", Heavy Duty, brushed steel finish, 120 v. Auto "no touch", Heavy Duty, brushed steel finish, 220 v. Auto "no touch", High Speed, white finish, 120 v. Auto "no touch", High Speed, stainless steel, 120 v. Ecofast, hands free dryer, polished stainless finish, 120v. Ecofast, hands free dryer, white finish, 120 v. Ecofast, hands free dryer, brushed stainless, 120 v. Ecofast, hands free dryer, black epoxy finish, 120 v. Specifications Code 1187: Approximately 20 second drying time. Sensitive distance of sensor: 4-12” (10-30 cm). Touch free sensor is activated when hands are placed within the set range under spout. There is a 0.6 sec delay for ON and a 2 second delay for OFF . The power will be cut off automatically in cases of irregular use over 120 seconds, sensor will reset during normal use. Sensor is 100% moisture proof. Warranty: 5 years. Wind Measure: 161 cfm, (274 m /h), Wind velocity: (16.5m/sec). Installation: Ensure when mounted that dryer is 12” (30 cm) above any fixed or movable objects. For unrestricted access ensure bottom of dryer does not exceed 48” (220 cm) from floor. Four threaded mounting anchors and hole location template provided. 3 Specifications Code 1192/1193: Drying time: between 7-10 seconds. Blue L.E.D. Helps target ideal drying area. Outer casing is drawn steel with porcelain enameled finish. Whole unit is rated at 1600 watts. Heating element is 900 watts brush motor with dual ball bearings 700W, 18000 R.P.M. Operating Voltage : 110-120 Vac, 50/60Hz, 1.3 - 1.6 kw. Motor thermal protection: contains an auto resetting thermostat which turns the unit off at 105 C (221 F). Motor overload protection: Heater thermal protection: An auto resetting thermostat turns the unit off at 85 C (185 F). Air speed output: 100 m/s (225 mi/hr). Sensor range: 7” (18 cm) adjustable.14.6 lbs. (6.6 kg). Specifications Code 1194, 1195, 1196, & 1198: Features: Drying time: 10-15 seconds. Outer casing is 18 gauge drawn in white powder coat finish (1195), black epoxy finish(1198), stainless steel with chrome finish (1194), stainless steel satin finish (1196). Lead Info: Minimum Energy Performance: Design and Construction, EA Prerequisite 2 Optimize Energy Performance: Design and Construction, EA Credit 1 Operating Voltage: Whole unit is rated at 1000 watts. Heating element: 500 watts. Operating Voltage: 110-120 Vac, 50/60Hz, Amps: 1.0kw. Standby Power: Less than0.5W. Brush motor: 0.67 HP, 16k - 29k R.P.M, dual ball bearings. Motor thermal protection: Auto resetting thermostat turns unit off at 85 deg.C(185 deg. F).Sensor range: 6”-7" (15-18cm). Air speed output: 45.5 - 70 m/s (164 - 252 km/hr), Volume: 71-102 m3/ h, (42-60 CFM). 1198: 95-115 m/s (212-257 mi/hr) Volume: 80 m3/h, (47 cfm). Sound Level: 68.9 dB-A@ 2m. Air output temperature: 55 degrees C (131 deg. F). 7” (17.5 cm) 48” maximum (120 cm) 12” (30 cm) sensor area must be clear of all obstructions. Floor Code 1187 Code 1190 Code 1194 Code 1195 Code 1196 Code 1192 Code 1193 Wall Comes with vibration absorbing anchors, four (4) in total. Drill 3/16” dia. (8mm) holes 1.5” deep (4cm). anchor, 6mm washer urethane sleeve lock washer lock nut 9” (23 cm) vandal resistant security hex socket cap screws secure the cover to chassis 13” (33 cm) R R 5G68 41 4" (10.1cm) 10.75" (27.4cm) 8.25" (21cm) ADA Compliant 4” (10.1cm) Unit Depth Code 1198